Kia Optima: Vehicle break-in process
No special break-in period is needed. By following a few simple precautions for the first 1,000 km (600 miles) you may add to the performance, economy and life of your vehicle.
- Do not race the engine.
- While driving, keep your engine speed (rpm, or revolutions per minute) between 2,000 rpm and 4,000 rpm.
- Do not maintain a single speed for long periods of time, either fast or slow. Varying engine speed is needed to properly break-in the engine.
- Avoid hard stops, except in emergencies, to allow the brakes to seat properly.
- Don't let the engine idle longer than 3 minutes at one time.
- Don't tow a trailer during the first 2,000 km (1,200 miles) of operation.
Operation in foreign countries
If you are going to drive your vehicle in another country, be sure to:
Observe all regulations regarding registration and insurance.
Determine that acceptable fuel is available.
...
See also:
Storing positions into memory using the buttons on the door
Storing driver’s seat positions
1. Shift the shift lever into P while the ignition switch is ON. 2. Adjust
the driver seat to position comfortable for the driver. 3. Press SET button on
the contr ...
Safety Belt Warning
As a reminder to the
driver and passenger, safety belt warning light will blink for approximately 6 seconds
each time you turn the ignition switch ON.
If the driver's lap/shoulder belt is not ...
Air conditioning
Press the A/C button to turn the air conditioning system on (indicator light
will illuminate).
Press the button again to turn the air conditioning system off. ...