Kia Optima: Underdrive Brake Control Solenoid Valve(UD/B_VFS). Specifications
Specifications
Direct control VFS[35R/C]▷ Control type : Normal low type
|
Control Pressure kpa(kgf/cm², psi) |
500.14~9.81(5.1~0.1,72.54~1.42) |
|
Current value(mA) |
50~850 |
| Internal
resistance(Ω) |
5.1 |
Underdrive Brake Control Solenoid Valve(UD/B_VFS). Description and Operation
Description
Underdrive brake control solenoid valve(UD/B_VFS) is attached to the valve body.
This variable force solenoid valve directly controls the hydraulic pressure inside
the underdrive brak ...
Underdrive Brake Control Solenoid Valve(UD/B_VFS). Schematic Diagrams
Circuit Diagram
...
See also:
Installation
1.
Installation is reverse of removal.
Fuel tank band installation nut:
39.2 ~ 54.0 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~
39.8 lb-ft)
...
Seat height (for driver’s seat)
Pull the front portion of the control switch up to raise or down to lower the
front part of the seat cushion. Pull the rear portion of the control switch up to
raise or down to lower the rear pa ...
To increase cruise control set speed
Follow either of these procedures:
Move the lever (1) up (to RES+) and hold it. Your vehicle will accelerate.
Release the lever at the speed you want.
Move the lever (1) up (to RES+) and re ...
Copyright © www.kiopman.com 2024