The ignition switch must be on for the turn signals to function. To turn on the turn signals, move the lever up or down. Green arrow indicators on the instrument panel indicate which turn signal is operating. They will self-cancel after a turn is completed. If the indicator continues to flash after a turn, manually return the lever to the OFF (middle) position.
Lane Change Signals
To signal a lane change, move the turn signal lever slightly and hold it in position. The lever will return to the OFF (center) position when released.
If an indicator stays on and does not flash or if it flashes abnormally, one of the turn signal bulbs may be burned out and will require replacement.
Cluster ionizer. Description and Operation
Description
1.
The function of cluster ion generator
is cleaning air by sterilizing and dissolving of air conditioner.
2.
The function of cluster ion generator
is co ...
When to replace seat belts
The entire in-use seat belt assembly or assemblies should be replaced if the
vehicle has been involved in an accident. This should be done even if no damage
is visible. Additional questions concer ...
Explanation of scheduled maintenance items
Engine oil and filter
The engine oil and filter should be
changed at the intervals specified in the
maintenance schedule. If the car is being
driven in severe conditions, more frequent
oil an ...