Kia Optima: Turbo Charger. Components and Components Location

Exhaust Manifold. Repair procedures

Removal and Installation 1. Remove the engine cover. 2. Disconnect the battery negative terminal. Tightening torque4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ ...

Turbo Charger. Repair procedures

On-vehicle Inspection Turbocharger Diagnostic Flow If any problem related with turbocharger, such as lack of engine power, poor acceleration, abnormal engine noise or oil leaks, ma ...

See also:

Front Seat. Components and Components Location
Components 1. Headrest 2. Headrest guide 3. Front seat back cover 4. Front seat back warmer 5. Front seat back frame 6. Front seat duct 7. Front seat back boa ...

Inspection
1. Measure terminal-to-terminal resistance of the blower resistor. 2. measured resistance is not within specification, the blower resistor must be replaced. (After re ...

General
1. Basically, all measurements in this manual are taken with a tracking gauge. 2. When a measuring tape is used, check to be sure there is no elongation, twisting or ...