The TCS indicator will illuminate when the ignition key is turned to the “ON” position, but should go off after 3 seconds. It means the TCS is in the stand-by status and at the moment of the actual operation of the TCS, the indicator will blink.
Press the TCS switch, then the system will be deactivated and the TCS indicator will illuminate.
If the TCS indicator stays on in the TCS ON mode, take your car to your Authorized Kia Dealer and have the system checked.
Glass antenna
When the radio power switch is turned on while the ignition key is in either
the “ON” or “ACC” position, your car will receive both AM and FM broadcast signals
through the antenna in the rear wi ...
Towing with a vehicle other than a tow truck
If towing is necessary, we recommend you to have it done by an Authorized Kia
dealer or a commercial tow truck service.
If towing service is not available in an emergency, your vehicle may be tem ...
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the OCV connector.
3.
Measure resistance between the OCV terminals 1 and
2.
4.
...