Kia Optima: TPMS Receiver. Description and Operation
Operation
| 1. |
General Function
| A. |
Spare tire inflation
/ DTC state is not displayed. |
|
| 2. |
General Conditions to Learn New
Sensors :
| A. |
Receiver must Auto-Locate
4 road sensors. |
| B. |
Auto-location / learning
only functions when speed is more than 25 kph (approx. 15 mph). |
| C. |
Receiver must determine
that it is confident that sensor is not temporary : |
| 2) |
Uses confidence reduction
of previously learned sensors. |
| D. |
Typical time at driving
over 25 kph to learn a new sensor is up to 10 minutes. |
|
| 3. |
General Conditions to Un-Learn
a sensor that is removed :
| A. |
It takes less than 10
minutes at more than 25 kph. |
| B. |
Confidence reduction
is dependant on vehicle speed and the number of sensors known to
the receiver. |
|
Circuit Diagram
Connector pin number
Pin NO.
Discription
Remark
1
-
2
-
...
See also:
Tire care
For proper maintenance, safety, and
maximum fuel economy, you must
always maintain recommended tire
inflation pressures and stay within
the load limits and weight distribution
recommended fo ...
Inspection
Throttle Position Sensor (TPS)
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Start the engine and measure the output voltage of
TPS 1 and 2 at C.T. and ...
Overdrive Clutch Control Solenoid Valve(OD/C_VFS). Description and Operation
Description
Overdrive clutch control solenoid valve(OD/C_VFS) is attached to the valve body.
This variable force solenoid valve directly controls the hydraulic pressure inside
the overdrive clutc ...
TPMS Receiver. Schematic Diagrams