1. Set the mode selection switch to the position.
When you select position, the system automatically turns on the outside (fresh) air mode.
2. Set the temperature control knob to the extreme right/hot position
3. Set the fan speed control knob to the “3” or “4” position.
WARNING
Do not use the or position during cool operation in extremely humid weather. The difference between the temperature of the outside air and that of the windshield could cause the outer surface of the windshield to fog up, causing loss of visibility. In this case, set the mode selection knob to the position and fan speed control knob to the lower speed.
✽ NOTICE
If you don’t want outside (fresh) air when operating in either of these modes, air intake control switch again will deactivate the outside (fresh) air mode.
Components (3)
1. Vaccum hose
2. Tube mounting braket
3. Check valve
4. Intensifier
...
Engine Number
1.
Engine fuel
- G : Gasoline
2.
Engine range
- 4 : 4 cycle 4 cylinder
3.
Engine development order
and capacity- K : Theta ...