Description
1. | Heater unit includes mode control actuator and temperature control actuator. |
2. | Temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. Signal from control unit adjusts position of temperature door by operating temperature switch and then temperature will be regulated by the hot/cold air ratio decided by position of temperature door |
Installation
1.
Remove the ignition key from
the vehicle.
2.
Disconnect the battery negative
cable from battery and wait for at least three minutes before beginning
work.
...
RCV Control Solenoid Valve. Description and Operation
Description
RCV (Recirculation Valve) Control Solenoid Valve is installed
on the intercooler inlet pipe and operates the RCV actuator which controls the
by-pass passage of the turbocharger comp ...
System operation
Ventilation
1. Set the mode to the position.
2. Set the air intake control to the outside (fresh) air position. 3. Set the
temperature control to the desired position. 4. Set the fan speed contr ...