In the TCS ON mode, the indicator in the instrument cluster will not be illuminated.
The indicator will illuminate when the ignition key is turned to the “ON” position, but should go off after 3 seconds. It means the TCS is in the stand-by status and at the moment of the actual operation of the TCS, the indicator will blink.
To switch to TCS OFF mode, press the TCS switch. System will be deactivated and the TCS indicator in the instrument cluster will illuminate.
If the TCS indicator stays on in the TCS ON mode, take your car to your Authorized Kia Dealer and have the system checked.
✽ NOTICE
Recommended SAE Viscosity Number
✽ NOTICE
Always be sure to clean the area around any filler plug, drain plug, or dipstick
before checking or draining any lubricant. This is especially important in dusty
or sandy areas an ...
Balance Shaft & Oil Pump. Components and Components Location
Components
1. Balance shaft & oil pump assembly
2. Balance shaft chain tensioner
3. Balance shaft chain
4. Balance shaft chain sprocket
5. Balance shaft ...
Front Seat Adjustment - Power
The driver's seat can be adjusted by using the control knob on the left side
of the seat. Before driving, adjust the seat to the proper position so as to easily
control the steering wheel, ped ...