Kia Optima: Sunroof - Knowing your vehicle - Kia Optima MS/Magentis 2000-2005 Owners ManualKia Optima: Sunroof

Your sunroof can be opened or closed electrically when the ignition switch is

Your sunroof can be opened or closed electrically when the ignition switch is in the “ON” position. You can slide or tilt the sunroof by depressing the corresponding switch located on the dome light assembly.

To tilt the sunroof, press “UP” on the tilt switch located on the dome light assembly. To close it, press “DOWN” on the tilt switch.

• Type A

To slide the sunroof, press OPEN on the slide switch located on the dome light assembly. Hold the slide switch until the sunroof reaches the desired position then release the switch.

To close the sunroof, press CLOSE on the slide switch and hold it until it is closed completely.

• Type B (If equipped)

To use the autoslide feature, momentarily press the “SLIDE OPEN” button on the overhead console. The sunroof will slide all the way open. To stop the sunroof sliding at any point, press any sunroof control button.

To close the sunroof, press CLOSE on the slide switch and hold it until it is closed completely.

✽ NOTICE

WARNING - WARNING -

Never stick your head, arms, etc. out of the sliding sunroof.

Electrical Power Outlet
To plug in auxiliary electrical equipment, flip the outlet cover open from the edge of the cover and follow the proper installation instructions that are included with any electrical equipment y ...

Manual operation
If the sunroof does not operate electrically 1. Remove the rectangular plastic lens in the front of the roof panel. 2. Turn the cross bolt with a Phillips screw driver counterclockwise to remove t ...

See also:

Description and Operation
Function Audio Bluetooth System General Feature • This audio system supports Bluetooth®hands-free and stereo-headset features.- HANDS-FREE feature: Making orreceiving c ...

Steering Angle Sensor. Description and Operation
Description The Steering Angle Sensor (SAS) is installed in MDPS (Motor Driven Power Steering) and it sends messages to HECU through CAN communication line.The SAS is used to determine turning di ...

Inside rearview mirror
Adjust the rearview mirror so that the center view through the rear window is seen. Make this adjustment before you start driving. WARNING - Rear visibility Do not place objects in the rear seat ...

Copyright © www.kiopman.com 2024