Kia Optima: Starter
Relay. Repair procedures
Inspection
1. |
Remove the fuse box cover. |
2. |
Remove the starter relay (A).
|
3. |
Using an ohmmeter, check that there is continuity
between each terminal.
Terminal
|
Continuity
|
30 - 87
|
NO
|
85 - 86
|
YES
|
|
4. |
Apply 12V to terminal 85 and ground to terminal 86. Check for continuity between terminals 30 and 87.
|
5. |
If there is no continuity, replace the starter relay. |
6. |
Install the starter relay. |
7. |
Install the fuse box cover. |
Armature Inspection
And Test
1.
Remove the starter.
2.
Disassemble the starter as shown at the beginning
of this procedure.
...
See also:
Replacement
ATF of 6 speed automatic transaxle doesn’t need to be replaced. If the vehicle
is used severely in business or personal use, replace ...
Wheel Replacement
When replacing the metal wheels for any reason, make sure the new wheels are
equivalent to the original factory units in diameter, rim width and offset.
WARNING
A wheel that is not the correc ...
Description and Operation
Description
Exhaust emissions (CO, HC, NOx) are controlled by a combination
of engine modifications and the addition of special control components.Modifications to the combustion chamber, intake m ...