Kia Optima: Rheostat. Repair procedures
Inspection
| 1. | Disconnect the negative (-) battery terminal. |
| 2. | Remove the crash pad lower panel. (Refer to the BD group - "Crash pad") |
| 3. | Remove the crash pad side switch
assembly (A) as shown below picture.
|
| 4. | Disconnect the rheostat connector
(A) from lower crash pad switch.
|
| 5. | Operate the rheostat switch and
check for continuity between terminals.
|
Installation
1.
Install the heater control module.
...
See also:
SS-A Solenoid Valve(ON/OFF). Description and Operation
Description
SS-A solenoid valve is attached to the valve body and is an on/off solenoid valve
that is used to change gears. SS-A Solenoid valve(ON/OFF) is installed at valve
body.
...
Removal
1.
Remove the battery and the battery
tray. (Refer to "Charging system" in EE group.)
2.
Remove the under cover (A).
Tightening torque:7.8 ~
11 ...
Side Airbag (SAB) Module. Description and Operation
Description
The Side Airbags (SAB) are installed inside the front seat and protects the driver
and passenger from danger when side crash occurs. The SRSCM determines deployment
of side airbag by ...