Kia Optima: Replacement (Without EPB)
Rear brake pads
| 1. | Loosen the guide rod bolt (B)
and pivot the caliper (A) up out of the way.
|
| 2. | Replace pad shim (D), pad retainers
(C) and brake pads (B) in the caliper carrier (A).
|
Removal
[Without EPB]
1.
Remove the rear wheel & tire.
Tightening torque:88.3
~107.9 N.m(9.0 ~11.0 kgf.m, 65.1 ~79.6 lb-ft)
2.
Rem ...
Replacement (With EPB)
Rear brake pads
1.
Remove the rear wheel & tire.
2.
Connect the GDS to the data link
connector located underneath the dash panel.
3.
Ignition "ON& ...
See also:
Overhead Console Lamp. Schematic Diagrams
Circuit Diagram
...
Troubleshooting
Troubleshooting
Symptom
Probable cause
Remedy
Play in steering
Loose yoke plug
Retighten
Loose steering gear ...
Windshield Glass. Components and Components Location
Components
1. Windshield side molding
2. Windshield glass
...
Copyright © www.kiopman.com 2024