Kia Optima: Replacement
Standard values, such as torques and certain adjustments, must be strictly
observed in the reassembly of all parts.
If removed, the following
parts should always be replaced with new ones.
5. |
Cotter pins (split pins) |
6. |
Plastic nuts
Depending on their location. |
7. |
Sealant should be applied
to gaskets. |
8. |
Oil should be applied to
the moving components of parts. |
9. |
Specified oil or grease
should be applied to the prescribed locations (oil seals, etc) before assembly.
|
When replacing parts, use KIA MOTORS genuine parts.
...
Use gauges and testers to adjust correctly the parts to standard values correctly. ...
See also:
Theft-alarm stage
The alarm will be activated if any of the following occurs while the system is
armed.
A front or rear door is opened without using the transmitter (or smart
key).
The tailgate is opened wit ...
Service Standard
Item
Specification
Ignition Timing (°)
BTDC 6 ± 10
Idle Speed (rpm)
A/C OFF
Neutral, N, P-range
70 ...
Sliding the sunroof
When the sunshade is closed
If you pull the sunroof control lever backward to the second detent position,
the sunshade will slide all the way open then the sunroof glass will slide all the
way ...