1. | Disconnect the negative (-) battery terminal. |
2. | Using the screwdriver, remove
the side cover (A).
|
3. | Loosen the mounting screw and
then remove the crash pad lower cover (A).
|
4. | Disconnect the connector (A),
and then remove the crash pad lower cover.
|
5. | Using the screwdriver, remove
the center garnish (A).
|
6. | Disconnect the connector and
then remove the blower & A/C controller (A).
|
7. | Loosen the control panel mounting
screws and then remove the control panel (A).
|
8. | Installation is the reverse order of removal. |
Headlight escort function
The headlights (and/or taillights) will remain on for approximately 20 minutes
after the ignition key is removed or turned to the ACC or LOCK position. However,
if the driver’s door is opened and ...
Driver’s Door Power Window Controls
The driver’s door has a master power window switch that controls all the windows
in the vehicle. the ignition switch must be in the ON position for power windows
to operate. To open a window, pr ...
Use of MTBE
Kia recommends avoiding fuels containing MTBE (Methyl Tertiary Butyl Ether) over
15.0% vol. (Oxygen Content 2.7% weight) in your vehicle.
Fuel containing MTBE over 15.0% vol. (Oxygen Content 2.7% w ...