1. | Disconnect the negative (-) battery terminal. |
2. | Remove the main crash pad lower
cover (A).
|
3. | Disconnect the connector (A) of the blower motor. |
4. | Remove the blower motor (B) after
loosening the mounting screws.
|
5. | Installation is the reverse order of removal. |
Function
Function RequirementsThe BCM controls IPS and relay on the SJB. For example,
if BCM requests head lamp low beam control, then BCM requests related lamp control
at one time.
Signal Flow DiagramThi ...
Using CD Player
1. CD Button
If the CD is loaded, turns to CD mode. If no CD, it displays “No Media” for 3
seconds and returns to the previous mode.
2. 1 Button (RANDOM)
Press this button for less than 0.8 sec ...
Chart 6
...