1. | Disconnect the negative (-) battery terminal. |
2. | Using the screwdriver, remove
the side cover (A).
|
3. | Loosen the mounting screw and
then remove the crash pad lower cover (A).
|
4. | Disconnect the connector (A),
and then remove the crash pad lower cover.
|
5. | Remove the shower duct (A).
|
6. | Loosen the mounting bolts and
than remove the BCM. (Refer to BE group - “BCM”) |
7. | Disconnect the mode control actuator connector (A). |
8. | Loosen the mounting screw and
then remove the mode control actuator (B).
|
9. | Installation is the reverse order of removal. |
Description and Operation
Description
System OverviewThe System offers the following features:
-
Human machine interface through
a 1-stage button, for terminal switching and engine start.
-
Co ...
Uniform Tire Quality Grading
The following information relates to the tire grading system developed by the
National Highway Traffic Safety Administration (NHTSA) for grading tires by tread
wear, traction and temperature perfo ...
Center High-Mounted Stoplight Bulb Replacement
1. Remove the cover and turn the bulb socket counterclockwise and remove it from
the housing.
2. Push the bulb in, then rotate it one- quarter turn counterclockwise and remove
the bulb from the ...