1. | Disconnect the negative (-) battery terminal. |
2. | Loosen the mounting bolts and
then remove the under cover (A).
|
3. | Disconnect the connector and
then remove the ambient temperature sensor (A).
|
4. | Installation is the reverse order of removal. |
Canister Close Valve (CCV). Description and Operation
Description
Canister Close Valve (CCV) is installed on the canister ventilation
line. It seals evaporative emission control system by shutting the canister
from the atmosphere when leakage dete ...
Inspection
1.
Check the signal waveform of the CMPS and CKPS using
the GDS.
Specification:
Refer to “Wave Form”
...
Headlight High Beam Indicator
This indicator illuminates
when the headlights are on and in the high beam position or when the turn signal
lever is pulled into the Flash-to-Pass position. ...