Kia Optima: Replacement
| 1. |
Remove the front wheel & tire.
Tightening torque :
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
|
|
Be careful not to damage to the hub bolts when removing the front
wheel & tire. |
|
| 2. |
Disconnect the stabilizer link
(B) from the front strut assembly (A) after loosening the nut.
Tightening torque :
98.1 ~ 117.7N.m (10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)
|
|
| 3. |
Remove the split pin and castle
nut and then disconnect the tie-rod end (A) from the front knuckle.
Tightening torque :
34.3 ~ 44.1N.m(3.5 ~ 4.5kgf.m, 25.7 ~ 32.5lb-ft)
|
|
| 4. |
Loosen the bolt & nut and then
remove the lower arm (A).
Tightening torque :
98.1 ~ 117.7N.m (10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)
|
|
| 5. |
Loosen the bolt (A) and then
disconnect the universal joint assembly from the pinion of the steering
gear box.
Tightening torque :29.4
~ 34.3N.m (3.0 ~ 3.5kgf.m, 21.7 ~ 25.7lb-ft)
|
| •
|
Keep in the neutral-range
to prevent damage of the clock spring inner cable when you
handle the steering wheel. |
| •
|
Do not use the
bolt again. |
|
|
| 6. |
Remove the under cover (A).
|
| 7. |
Loosen the bolt (A) & nut (B)
and then remove the roll rod stopper.
Tightening torque :
107.9 ~ 127.5N.m (11.0 ~ 13.0kgf.m, 79.6 ~ 94.0lb-ft)
|
|
| 8. |
Disconnect the muffler rubber
hanger (A).
|
| 9. |
Loosen the bolts & nuts and then
remove the sub frame (A).
Tightening torqueSub frame
mounting bolts & nuts:
156.9 ~ 176.5N.m (16.0 ~ 18.0kgf.m, 115.7 ~ 130.2lb-ft)Sub frame
stay bolts & nuts:
44.1 ~ 58.8N.m (4.5 ~ 6.0kgf.m, 32.5 ~ 43.4lb-ft)
|
|
| 10. |
Remove the stabilizer bar. |
| 11. |
Loosen the bolt and then remove
the steering gear box (A).
Tightening torque :
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
|
|
| 12. |
Installation is the reverse of
the removal. |
1.
Remove the dust packing & cap
(A) from the pinion housing.
2.
Loosen the lock nut and then
remove the tie rod end (B) and lock nut (A) from the tie rod ...
See also:
Winter driving
Severe weather conditions in the winter
result in greater wear and other problems.
To minimize the problems of winter
driving, you should follow these suggestions:
Snowy or Icy conditions
To ...
Paint Code
TF
Code
Color
SWP
Snow White Pearl
3D
Bright Silver
ABP
Aurora Black
ABT
...
Adjustment
1.
Check that the waste gate turbo charger is cool enough
to work.
2.
Turn the ignition switch to OFF position.
3.
Connect the diagnosti ...
Disassembly