Kia Optima: Replacement
Repair tire after using the Tire Mobility
Kit (TMK) |
When the TPMS warning lamp OFF
1. |
Remove the TMK repaired tire,
wheel and TPMS sensor. (Refer to "Tire removal")
|
2. |
Remove the sealant on the wheel
and TPMS sensor (A) completely.
•
|
Clean the sealant
on the housing and sensing hole of TPMS sensor with clean
cloth, gauze or air inhalers. |
•
|
To prevent the
sensor and circuit board damage, do not use the pointed
instrument and give a lot of impact. |
|
|
3. |
Install the TPMS sensor to the
new tire. |
4. |
Check that the normal operation
of TPMS system. |
When the TPMS warning lamp ON
1. |
Remove the TMK repaired tire,
wheel and TPMS sensor. (Refer to "Tire removal")
|
2. |
Remove the sealant on the wheel
and TPMS sensor (A) completely.
•
|
Clean the sealant
on the housing and sensing hole of TPMS sensor with clean
cloth, gauze or air inhalers. |
•
|
To prevent the
sensor and circuit board damage, do not use the pointed
instrument and give a lot of impact. |
|
|
3. |
Install the TPMS sensor to the
new tire. |
4. |
Check the tire pressure using
the electrical tire pressure gauge. |
5. |
Check the tire pressure of TPMS
sensor using the GDS |
6. |
If the difference between two
checked pressures in the above is not more than 2 psi, TPMS sensor is normal.
Reinstall it to new tire. |
7. |
If the difference between two
checked pressures in the above is more than 2 psi, TPMS sensor is abnormal.
Install new TPMS sensor to new tire. |
8. |
Check that the normal operation
of TPMS system. |
Handle the sensor with care.
1.
Remove the tire. (Refer to "Tire
Removal")
2.
Remove the va ...
Sensor Fit
•
Handle the sensor with
care.
•
Avoid lubricant contact.
...
See also:
The Other Fuses And Relays Component. Repair procedures
Inspection
Power Relay Test (Type B)Check for continuity between the terminals.
A : Two turn unlock relay
1.
There should be continuity between
the No.30 and No.87 terminals when power ...
Glove box lamp
The glove box lamp comes on when the glove box is opened.
The parking lights or headlights must be ON for the glove box lamp to function.
CAUTION
To prevent unnecessary charging system drain, cl ...
Seat belt - Driver's 3-point system with emergency locking retractor
To fasten your seat belt:
To fasten your seat belt, pull it out of the retractor and insert the metal tab
(1) into the buckle (2). There will be an audible "click" when the tab locks in ...