Kia Optima: Replacement
| 1. |
Remove the rear wheel & tire.
Tightening torque:88.3
~ 107.9 N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
|
|
Be careful not to damage the hub bolts when removing the rear wheel
& tire. |
|
| 2. |
Remove the sprit pin and castle
nut and then disconnect the rear assist arm (A) from the rear axle.
Tightening torque:44.1
~ 53.9N.m(4.5 ~ 5.5kgf.m, 32.5 ~ 39.8lb-ft)
|
|
| 3. |
Loosen the bolt & nut and then
remove the rear assist arm (A) from the sub frame.
Tightening torque:107.9
~ 117.7N.m(11.0 ~ 12.0kgf.m, 79.6 ~ 86.8lb-ft)
|
|
| 4. |
Installation is the reverse of
removal. |
1.
Check the bushing for wear and
deterioration.
2.
Check for all bolts and nut.
...
See also:
Removal
1.
Release the residual pressure in fuel line (Refer
to “Release Residual Pressure in Fuel Line” in this group).
2.
Remove the fuel pump service cover (A) in the ...
Low Fuel Level warning
This warning light indicates
the fuel tank is near empty. The warning light will come on when the fuel level
has dropped to about 2.2 US gal. (8.5 liters). Refuel as soon as possible. ...
Repair procedures
Operation and Leakage Check
Check all of the following items:
Component
Procedure
Brake Booster (A)
Check brake operation by applying the brakes durin ...
Inspection