Kia Optima: Repair procedures
Inspection
| 1. | After disconnecting the vapor hose from the PCV valve, remove the PCV valve. Visually check for a collapsed vapor hose or hose leaks. |
| 2. | Reconnect the PCV valve to the vapor hose. |
| 3. |
Run the engine at idle, then put a finger over the
open end of the PCV valve and make sure that intake manifold vacuum
can be felt.
|
| 4. | If the vacuum is not felt inspect PCV operation, if operating correctly clean or replace the vapor hose. |
Schematic Diagrams
Schematic Diagram
...
Positive Crankcase Ventilation (PCV) Valve. Description and Operation
Operation Principle
...
See also:
Fender. Repair procedures
Replacement
•
Be careful not to damage
the fender and body.
•
When removing the cli ...
ESC (Electronic stability control)
The Electronic Stability control (ESC) system is designed to stabilize the vehicle
during cornering maneuvers. ESC checks where you are steering and where the vehicle
is actually going. ESC appl ...
Using CD Player
1. CD Button
If the CD is loaded, turns to CD mode. If no CD, it displays “No Media” for 3
seconds and returns to the previous mode.
2. 1 Button (RANDOM)
Press this button for less than 0.8 sec ...
Copyright © www.kiopman.com 2024