Kia Optima: Repair procedures
Adjustment
When shift shock is occurred or parts related with the transaxle are replaced, TCM
learning should be performed.
In the following case, TCM learning is required.
| • |
Transaxle assembly replacement
|
| 1. |
TCM learning condition
| A. |
ATF temperature: 40~100°C
(104~212°F) |
|
| 2. |
TCM learning procedure
| A. |
Stop learning Repeat
the below shift pattern four times or more with stepping on the
brake.
|
| 1. |
Drive the vehicle through
all gears at D range. Drive from stop to 1st to 2nd to 3rd to 4th
to 5th to 6th with keeping fixed throttle open. |
| 2. |
Down shift from 6th to
5th, 5th to 4th, 4th to 3rd, 3rd to 2nd, 2nd to 1st. |
| 3. |
Repeat the above driving
pattern four times or more.
Up-shift throttle open : 15~30%
|
|
Fault DiagnosisFeatures a fail-safe mechanism that prevents dangerous situations
from developing in the event of a transaxle failure. The limp home mode engages
if the transaxle malfunctions. ...
See also:
Engine compartment
2.4L Engine
2.0L Engine
* The actual engine room in the vehicle may differ from the illustration.
1. Engine coolant reservoir
2. Engine oil filler cap
3. Brake/clutch fluid reservoir
...
Description
Body control module receives various input switch signals controlling time and alarm
functions for the intermittent wiper timer, washer timer, rear defogger timer, seat
belts warning, central ...
Distance to Service
To enter the "Distance to Service" mode, press the TRIP button for less than
1 second.
Engine Oil(Tire Rotation) Service Required
1. If service is required, the message will be dis ...
Control System Composition
Schematic Diagrams