1. | Turn ignition OFF and disconnect the negative (-) battery cable. |
2. | Remove the crash pad lower panel. (Refer to Body – “Crash pad”) |
3. | Disconnect the EPB control unit
connector.
|
4. | EPB control unit mounting nuts
(B) and then remove EPB control unit.
|
Glove box lamp
The glove box lamp comes on when the glove box is opened.
The parking lights or headlights must be ON for the glove box lamp to function.
CAUTION
To prevent unnecessary charging system drain, cl ...
Description
The Electronic Throttle Control (ETC) System consists of
a throttle body with an integrated control motor and throttle position sensor
(TPS). Instead of the traditional throttle cable, an Accele ...
To Resume the Preset Speed
The vehicle will automatically resume the speed set prior to cancellation when
you press and release the RES/ACCEL switch, providing the vehicle speed is above
25 mph (40 km/h). ...