Kia Optima: Removal and Installation - Repair 
		procedures - Ignition System - Engine Electrical System - Kia Optima TF 2011-2024 Service ManualKia Optima: Removal and Installation

1. Disconnect the ignition coil connectors (A).

2. Remove the ignition coils (A).

Tightening torque :

3.9 ~ 5.9N.m (0.4 ~ 0.6kgf.m, 2.9 ~ 4.3lb-ft)


3. Installation is the reverse of removal.

Repair procedures
On-vehicle Inspection Spark Test 1. Disconnect the ignition coil connectors (A). 2. Remove the ignition coils (A). ...

Charging System
...

See also:

Troubleshooting
Troubleshooting Symptom Possible cause Remedy Hard steering Improper front wheel alignment Excessive turning resistance of lower arm ba ...

Components (3)
...

Service Adjustment Procedure
Oil level Check A check of ATF level is not normally required during scheduled services. If an oil leak is found, perfo ...

Copyright © www.kiopman.com 2024