Kia Optima: Removal
1. |
Turn the ignition switch OFF and disconnect the battery
negative (-) cable. |
2. |
Disconnect the crankshaft position sensor connector
(A).
|
3. |
Remove the protector (A).
|
4. |
Remove the installation bolt (A), and then remove
the crankshaft position sensor.
|
1.
Check the signal waveform of the CMPS and CKPS using
the GDS.
Specification:
Refer to “Wave Form”
...
•
Install the component with the specified
torques.
•
Note that internal damag ...
See also:
Removal and Installation
1.
Remove the engine cover.
2.
Disconnect the battery negative terminal (A).
Tightening torque
:4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4lb-ft) ...
Rear Seat
The rear seatbacks fold forward to provide additional cargo space and to provide
access to the trunk area.
To fold the rear seatback(s) down, press the unlock button located on top
of the s ...
Inspection
Sprockets, Chain Tensioner, Chain Guide, Chain Tensioner Arm
1.
Check the camshaft sprocket and
crankshaft sprocket for abnormal wear, cracks, or damage. Replace as necessary.
...