Kia Optima: Removal
1. |
Turn the ignition switch OFF and disconnect the battery
negative (-) cable. |
2. |
Disconnect the engine coolant temperature sensor
connector (A).
|
3. |
Remove the spring clip (A), and then pull the sensor
from the water temperature control assembly.
Note that engine coolant may be flowed out
from the water temperature control assembly when removing the
sensor.
|
|
4. |
Supplement the engine coolant (Refer to “Cooling
System” in EM group).
|
1.
Turn the ignition switch OFF.
2.
Remove the ECTS (Refer to "Removal").
3.
After immersing the thermistor of the sensor into
engi ...
•
Install the component with the specified
torques.
•
Note that internal damag ...
See also:
Air Conditioning Switch
Press the switch to turn the air conditioning system on. An indicator light in
the switch will illuminate when the fan switch is on indicating air conditioning
system operation. Press the switch ...
Inhibitor Switch. Specifications
Specifications
▷ Type: Combination of output signals from 4 terminals
Power supply (V)
12
Output type
Combination of output signals
...
Removal
Room Lamp
1.
Disconnect the negative(-) battery
terminal.
2.
Carefully remove the lamp lens
(A) from the room lamp with a flat-tip screwdriver.
...