Kia Optima: Removal
| 1. | Turn the ignition switch OFF and disconnect the battery negative (-) cable. |
| 2. | Disconnect the manifold absolute pressure sensor connector (A). |
| 3. |
Remove the installation bolts (B), and then remove
the sensor from the surge tank. [MAPS #1]
|
![[MAPS #2]](images/books/928/stffl2011n.gif)
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the MAPS at idle and
IG ON.
Specification:
Refer to " ...
Installation
•
Install the component with the specified
torques.
•
Note that internal damag ...
See also:
Removal
AVN Head Unit
•
Take care not to scratch
the center fascia panel and related parts.
•
...
Inspection
Front brake disc thickness check
1.
Check the brake pads for wear
and fade.
2.
Check the brake disc for damage
and cracks.
3.
Remove all rust and conta ...
Automatic transaxle operation
The automatic transaxle has 6 forward speeds and one reverse speed. The individual
speeds are selected automatically, depending on the position of the shift lever.
✽ NOTICE
The first few sh ...
Copyright © www.kiopman.com 2024