Kia Optima: Removal
1. |
Remove the timing chain. (Refer
to Timing system in this group) |
2. |
Install a stopper pin (A) after
compressing the balance shaft chain tensioner. |
3. |
Remove the balance shaft chain
hydraulic tensioner (B). |
4. |
Remove the balance shaft chain
tensioner arm (C). |
5. |
Remove the balance shaft chain
guide (D).
|
6. |
Remove the balance shaft & oil
pump module (A) and balance shaft chain (B) and the sprocket (C).
Do not disassemble the balance shaft & oil pump module. |
|
1.
The key of crankshaft should
be aligned with the mating face of main bearing cap. As a result of this,
the piston of No.1 cylinder is placed at the top dead center on compression ...
See also:
Injector. Troubleshooting
Signal Waveform
...
Glove Box
To open the glove box door, pull the latch toward you. The glove box door can
be locked (and unlocked) with the vehicle key.
WARNING
To reduce the risk of injury in case of an accident or s ...
Passenger Airbag (PAB) Module. Description and Operation
Description
The passenger airbag (PAB) is installed inside the crash pad and protects the front
passenger in the event of a frontal crash. The SRSCM determines if and when to deploy
the PAB.
...