1. | Disconnect the negative(-) battery terminal. |
2. | Remove the crash pad lower panel. (Refer to the BD group - "Crash pad") |
3. | Disconnect the start/stop button
connector (A).
|
4. | Remove the start/stop button
(A) after removing the screws.
|
Cup holder
WARNING - Hot liquids
Do not place uncovered cups of hot liquid in the cup holder while the
vehicle is in motion. If the hot liquid spills, you may burn yourself. Such
a burn to the driver ...
Recalibrating the sunroof motor
If your battery is disconnected or you manually open the sunroof using the hex
head wrench, you have to re-set your sunroof motor as follows :
Turn the ignition key to the ON position.
Pull th ...
Inspection
1.
Measure the pressure of high
pressure line by measuring voltage output between NO.1 and NO.2 terminals.
2.
Inspect the voltage value whether
it is sufficie ...