Kia Optima: Removal
| 1. | Disconnect the negative (-) battery terminal. |
| 2. | Remove the auto light sensor
(A) from crash pad upper side by using screw (-) driver.
|
| 3. | Remove the auto light connector. |
Inspection
In the state of IGN1 ON, when multi function switch module detects auto light switch
on, tail lamp relay output and head lamp low relay output are controlled according
to auto light sensor's i ...
Installation
1.
Reconnect the auto light connector.
2.
Install the auto light sensor.
...
See also:
Sunshade
The sunshade can be opened with the glass panel automatically when the glass
panel is slid. But it must be closed manually. ...
CVVT Oil Temperature Sensor (OTS). Description and Operation
Description
Continuous Variable Valve Timing (CVVT) system advances or
retards the valve timing of the intake and exhaust valve in accordance with
the ECM control signal which is calculated by ...
Installation
•
Install the component with the specified
torques.
•
Note that internal damag ...
Copyright © www.kiopman.com 2024