Kia Optima: Removal
Side Repeater Lamp
| 1. |
Disconnect the negative (-) battery
terminal. |
| 3. |
Remove the side repeater lamp
assembly by using the a flat-tip screwdriver.
|
Apply the protective tapes on the arrow area and its related parts. |
|
| 4. |
Replace the bulb if it is necessary. |
Door Mirror Turn Signal Lamp
| 1. |
Disconnect the negative (-) battery
terminal. |
| 2. |
Remove the door mirror and door
mirror cover (A) after removing the screw.
|
Take care not to damage the mirror holder fixing clip. |
|
| 3. |
Remove the door mirror cover
(A) after removing the fixing clip.
|
Take care not to damage the mirror cover fixing clip. |
|
| 4. |
Remove the door mirror turn signal
lamp (B) after removing the screw and connector (A).
|
Side Repeater Lamp
1.
Install the bulb to the side
repeater lamp assembly.
2.
Install the side repeater lamp.
Door Mirror Turn Signal Lamp
1.
Install the do ...
See also:
CVVT Oil Temperature Sensor (OTS). Description and Operation
Description
Continuous Variable Valve Timing (CVVT) system advances or
retards the valve timing of the intake and exhaust valve in accordance with
the ECM control signal which is calculated by ...
SS-A Solenoid Valve(ON/OFF). Description and Operation
Description
SS-A solenoid valve is attached to the valve body and is an on/off solenoid valve
that is used to change gears. SS-A Solenoid valve(ON/OFF) is installed at valve
body.
...
Replacement
1.
Disconnect the negative (-) battery
terminal.
2.
Loosen the mounting screw and
then remove the crash pad lower cover (A).
3.
Remove the eva ...
Installation