1. | Disconnect the negative(-) battery terminal. |
2. | Remove the rear seat. (Refer to the BD group - "Rear seat") |
3. | Remove the package tray trim
(A). (Refer to the BD group -"Interior trim")
|
4. | Remove the soundproofing felt
(A) to remove the wiring.
|
5. | Remove the high mounted stop
lamp after removing screws and hook (A) carefully.
|
Do not lie down
To reduce the chance of injuries in the event of an accident and to achieve maximum
effectiveness of the restraint system, all passengers should be sitting up and the
front seats should be in an u ...
Tire traction
Tire traction can be reduced if you
drive on worn tires, tires that are
improperly inflated or on slippery
road surfaces. Tires should be
replaced when tread wear indicators
appear. Slow dow ...
Anchor Pretensioner (APT). Description and Operation
Description
Front seat belt anchor pretensioner operates as well as belt pretensioner at the
same time If it gets into its deploy condition after a collision. It is located
at near anchor on fron ...