Kia Optima: Removal
| 1. | Disconnect the negative(-) battery terminal. |
| 2. | Remove the heater comtral module. (Refer to the HA group - "Controller") |
Inspection
1.
It will be able to diagnose defects
of hazard switch with GDS quickly. GDS can operates actuator forcefully,
input/output value monitoring and self diagnosis.
2.
S ...
Installation
1.
Install the heater control module.
...
See also:
Automatic heating and air conditioning
The automatic climate control system is controlled by simply setting the desired
temperature.
The Full Automatic Temperature Control (FATC) system automatically controls the
heating and cooling ...
Repair procedures
Inspection
1.
After disconnecting the vapor hose from the PCV valve,
remove the PCV valve. Visually check for a collapsed vapor hose or hose
leaks.
2.
...
Rail Pressure Sensor (RPS). Specifications
Specification
...
Copyright © www.kiopman.com 2024