1. | Disconnect the negative(-) battery terminal. |
2. | Remove the lens trunk trim. (Refer to the BD group - "Trunk") |
3. | Replace the bulb (A) by turning
it counterclock wise.
|
Inspection
With the power seat switch in each position, make sure that continuity exists between
the terminals below. If continuity is not as specified, replace the power seat switch.
A : Power seat control s ...
Master Cylinder. Components and Components Location
Components
1. Reservoir cap
2. Reservoir
3. Grommet
4. Master cylinder
...
Console. Repair procedures
Replacement
Floor Console Replacement
[M/T]
•
When prying with a flat-tip
screwdriver, wrap it with p ...