1. | Disconnect the negative (-) battery terminal. |
2. | Remove the front bumper. (Refer to the BD group - "Front bumper") |
3. | Loosening the head lamp mounting
bolts (A) (2EA) and disconnect the head lamp connector (B). Then, remove the head lamp assembly (C).
|
4. | In case of HID type, disconnect
the head lamp leveling actuator connector (A).
|
5. | Remove the dust caps from the
head lamp assembly after turning in the counter clock-wise direction. A : Head Lamp (High) Cap B : Head Lamp (Low) Cap
|
Description and Operation
Refrigeration Cycle
...
Specifications
Specifications
Item
Specification
Type
Motor Driven Power Steering
Steering gear
Type
Rack & Pinion
...
Precautions For Catalytic Converter
If a large amount of unburned gasoline flows into the converter, it
may overheat and create a fire hazard. To prevent this observe th ...