Kia Optima: Removal
| 1. | Disconnect the negative (-) battery terminal. |
| 2. | Remove the driver airbag module. (Refer to the RT group) |
| 3. | Remove the steering wheel. (Refer to the ST group - "Steering column & shaft") |
| 4. | Remove the steering wheel cover
(A) after loosening the screws.
|
| 5. | Remove the steering wheel remote
control switch connector (A) after loosening the mounting screws.
|
Inspection
1.
Check the hands free remote control
switch for resistance between terminals in each switch position.
Switch
Connector
terminal
...
Installation
1.
Reassemble the steering wheel
remote control switch after connecting the connector.
2.
Reassemble the steering wheel.
3.
Reassemble the driver airbag
...
See also:
Inspection
1.
Check the driveshaft boots for
damage and deterioration.
2.
Check the driveshaft spline for
wear or damage.
3.
Check that there is no water
or ...
To fasten the front lap/shoulder belt
1. Grasp the buckle and tongue plate.
2. Slowly pull the lap/shoulder belt out from the retractor.
3. Insert the tongue plate into the open end of the buckle until an audible “click”
is heard, ...
Impact sensing door unlock system (if equipped)
All doors will automatically unlock when an impact causes the air bags to deploy. ...
Copyright © www.kiopman.com 2024