1. | Remove the mirror wiring cover
(A).
|
2. | Disconnect the mirror connector
(B) and remove the mounting screw (A).
|
3. | Slide the inside rear view mirror
rearward to remove the inside rear view mirror assembly (A).
|
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the oil temperature
sensor connector.
3.
Measure resistance between sensor
signal terminal and sensor g ...
Replacement
Problems And Replacement Parts:
Problem
Part set
GDS required?
All keys have been lost
Blank key (4)
YES
Antenna ...
Tilt steering
Tilt steering allows you to adjust the steering wheel before you drive. You can
also raise it to give your legs more room when you exit and enter the vehicle.
The steering wheel should be positione ...