Kia Optima: Removal
| 1. | Disconnect the negative(-) battery terminal. |
| 2. | Remove the lower (A) after loosening
the mounting screws. (Refer to the BD group - "Crash pad")
|
| 3. | Remove the heater control unit contained the rear glass defogger switch from the center fascia panel. |
Inspection
1.
The rear glass defogger switch
inputs can be checked using the GDS.
2.
To check the input value of rear
glass defogger switch, select option "Body Control Mod ...
Installation
1.
Install the heater control unit.
2.
Install the center fascia panel.
3.
Install the crash pad garnish.
...
See also:
Exterior General Caution
It is very important to follow the label directions when using any chemical cleaner
or polish. Read all warning and caution statements that appear on the label. ...
Muffler > Repair procedures
Removal and Installation
1.
Remove the front muffler (B)
after disconnecting the oxygen sensor connector (A).
Tightening torque:39.2
~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ...
Power Steering
Checking the Power Steering Fluid Level
With the vehicle on level ground, check the fluid level in the power steering
reservoir periodically. The fluid level should be between MAX and MIN indicat ...
Copyright © www.kiopman.com 2024