1. | Disconnect the negative (-) battery terminal. |
2. | Remove the lower (A) after loosening
the mounting screws. (Refer to the BD group - "Crash pad")
|
3. | Remove the heater control unit contained the windshield deicer switch from the center fascia lower panel. |
Schematic Diagrams
Schematic Diagram
CanisterThe Canister is filled with charcoal and absorbs evaporated
fuel vapor from the fuel tank. The gathered fuel vapor in canister is drawn
into the intake manifold b ...
Battery replacement
When replacement is necessary, use the following procedure.
1. Using a screwdriver, loosen the screw on the backside of the transmitter then
use a thin tool to pry open the transmitter.
2. Disas ...
Description
The SMART KEY system is a system that allows the user to access and operate a vehicle
in a very convenient way. To access the vehicle, no traditional key or remote control
unit is needed.The user ...