|
1. | Disconnect the negative (-) battery terminal. |
2. | Using a screwdriver or remover,
remove the crash pad garnish RH (A).
|
3. | Using a screwdriver or remover,
remove the crash pad side cover (A).
|
4. | After loosening the crash pad
lower panel mounting screws, then remove the lower panel (A).
|
5. | Remove the switch connector (A)
and SSB connector (B) from crash pad lower panel.
|
6. | Remove the crash pad garnish
LH (A) after removing the screws.
|
7. | Remove the instrument cluster
fascia panel (A) after loosening the screws.
|
8. | Remove the instrument cluster
(A) after loosening the screws.
|
9. | Disconnect the cluster connector
(A), then remove the cluster.
|
Camshaft Position Sensor (CMPS). Troubleshooting
Wave Form
...
Heated Oxygen Sensor (HO2S). Specifications
Specification
HO2S [Bank 1/Sensor 1]
Item
Specification
Heater Resistance (Ω)
2.5 ~ 4.0 [20°C(68°F)]
HO2S [Bank 1/Sensor 2]
...
Suggestions for Economical Operation
Your vehicle’s fuel economy depends mainly on your style of driving, where you
drive and when you drive.
Each of these factors affects how many miles (kilometers) you can get from a
gallon (liter ...