Passenger Compartment Junction Box (SJB)
1. | Disconnect the negative(-) battery terminal. |
2. | Remove the crash pad lower panel
(A). (Refer to the BD group - "Crash pad")
|
3. | Disconnect the connectors (A)
from the fuse side of the smart junction box.
|
4. | Remove the smart junction box after loosening the mounting nuts (2EA). |
5. | Disconnect the connectors from the back side of the smart junction box. |
Seat Heater (Non-Air Ventilation). Schematic Diagrams
Circuit Diagram
...
Inspection
1.
Measure terminal-to-terminal
resistance of the blower resistor.
2.
measured resistance is not within
specification, the blower resistor must be replaced. (After re ...
35R Clutch Control Solenoid Valve(35R/C_VFS). Schematic Diagrams
Circuit Diagram
...