Kia Optima: Removal
| 1. | Disconnect the negative (-) battery terminal. |
| 2. | Remove the crash pad lower panel
(A).
|
| 3. | Remove the reinforce panel after loosening the mounting bolts. |
| 4. | Remove the duct (A) after removing
the screw.
|
| 5. | Remove the accelerator pedal
module. (Refer to the FL group - "accelerator pedal") |
| 6. | Remove the body control module
after loosening nut (1EA) and screw (1EA) and disconnecting the connectors
(A).
|
Trouble Diagnostics When Using GDS
1.
The body control module can diagnose
by using the GDS more quickly.The BCM communicates with the GDS and then
reads the input/output value and drives the actuator.
...
Installation
1.
Install the body control module.
2.
Install the accelerator.
3.
Install the reinforce panel.
4.
Install the crash pad lower panel.
...
See also:
Lumbar support
The lumbar support can be adjusted by pressing the lumbar support switch on the
side of the drivers seat. Press the front portion of the switch to increase support,
or the rear portion of the sw ...
BLUETOOTH® PHONE OPERATION
1. VOLUME button : Raises or lowers speaker volume. 2.
button : Activates voice recognition.
3. button : Places and transfers calls.
4. button : Ends calls or cancels functions. ...
Removal
1.
Loosen the drain plug, and drain
the coolant. Remove the radiator cap to speed draining.
2.
Disconnect the oil cooler coolant
hoses (A).
3.
...
Copyright © www.kiopman.com 2024