Kia Optima: Removal
| 1. | Remove the radiator grill upper
cover. (Refer to the BD group - "Front bumper") |
| 2. | Remove the mounting nut and disconnect
the horn connector (B), then remove the horn (A).
|
Inspection
Test the horn by connecting battery voltage to the 1 terminal and ground the 2 terminal.
The horn should make a sound. If the horn fails to make a sound, replace it.
Horn Relay Inspection
1.
...
Installation
1.
Connect the horn connector, then
reassemble the horn.
2.
Reassemble the front bumper.
...
See also:
If the engine overheats
If your temperature gauge indicates overheating,
you will experience a loss of
power, or hear loud pinging or knocking,
the engine is probably too hot. If this happens,
you should:
1. Pull of ...
Removal Of Parts
First find the cause of the problem and then determine whether removal or
disassembly before starting the job.
...
Components
1. BJ assembly
2. Circlip
3. BJ boot band
4. BJ boot
5. Dynamic damper band
6. Dynamic damper
7. Shaft
8. TJ boot band
9. TJ boot
10. Spider a ...
Copyright © www.kiopman.com 2024