Kia Optima: Removal
| 1. | Disconnect the negative (-) battery terminal. |
| 2. | Remove the driver airbag module. (Refer to the RT group) |
| 3. | Remove the steering wheel. (Refer to the ST group - "Steering column & shaft") |
| 4. | Remove the steering wheel cover
(A) after loosening the screws.
|
| 5. | Remove the steering wheel remote
control switch connector (A) after loosening the mounting screws.
|
![[LH-Audio]](images/books/1609/stfbe1043d.gif)
![[LH-Mute]](images/books/1609/stfbe1044d.gif)
Inspection
1.
Check the audio remote control
switch (A) for resistance between connector terminals in each switch position.
[LH-Audio]
[LH-Mute]
[Audio]
Switch
...
Installation
1.
Reassemble the steering wheel
remote control switch after connecting the connector.
2.
Reassemble the steering wheel.
3.
Reassemble the driver airbag
...
See also:
Tire sidewall labeling
This information identifies and
describes the fundamental characteristics
of the tire and also provides
the tire identification number (TIN)
for safety standard certification. The
TIN ca ...
Component Location (2)
1. FOB holder
2. Door outside handle
3. Trunk lid open switch
4. FOB key
...
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the oil temperature
sensor connector.
3.
Measure resistance between sensor
signal terminal and sensor g ...
Copyright © www.kiopman.com 2024