Kia Optima: Removal
| • |
Take care not to scratch
the center fascia panel and related parts. |
| • |
Eject all the disc before
removing the audio unit to prevent damaging the CD player's load
mechanism. |
|
| 1. |
Disconnect the negative (-) battery
terminal. |
| 2. |
Using a screwdriver or remover,
remove the crash pad garnish RH (A).
|
Apply the protective tapes to crash pad garnish and its related
parts. |
|
| 3. |
Using a screwdriver or remover,
remove the crash pad side cover (A).
|
| 4. |
After loosening the crash pad
lower panel mounting screws, then remove the lower panel (A).
|
| 5. |
Remove the switch connector (A)
and SSB connector (B) from crash pad lower panel.
|
| 6. |
Remove the crash pad garnish
LH (A) after removing the screws.
|
| 7. |
Remove the instrument cluster
fascia panel (A) after loosening the screws.
|
| 8. |
Remove the center fascia lower
panel (A) after loosening the screws.
|
| 9. |
Remove the connectors (A) and
hose (B).
|
| 10. |
Remove the center fascia upper
panel (A) after loosening the screws.
|
| 11. |
Remove the audio assembly (A)
after loosening the mounting screws.
|
| 12. |
Disconnect the audio connectors
and cable (A), then remove the audio unit completely.
|
Lift the connector locking clip to the arrow direction, disconnect
the connector. When assembling, install the connector and connector
locking clip tightly.
|
|
If the CD does not eject, do not attempt to remove it because the
audio unit may be damaged.Contact an authorized dealership for assistance. |
|
-
Do not work in a dusty
or dirty place.
-
Do not touch the circuit
board with ...
See also:
Removal
1.
Remove the battery and the battery
tray. (Refer to "Charging system" in EE group.)
2.
Remove the under cover (A).
Tightening torque:7.8 ~
11 ...
Floor mat anchor(s)
When using a floor mat on the front floor carpet, make sure it attaches to the
floor mat anchor(s) in your vehicle. This keeps the floor mat from sliding forward.
WARNING
The following must be ...
Battery Saver Function
✽ NOTICE
The purpose of this feature is to prevent the battery from being discharged.
The system automatically turns off the small light when the driver removes the
ignition key and o ...
Disassembly