Kia Optima: Removal
1. |
Remove the rear wheel and tire.
Tightening torque:88.3
~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
|
|
2. |
Remove the rear wheel speed sensor
mounting bolt (A).
Tightening torque:7.8 ~
9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ 7.2 lb-ft)
|
|
3. |
Remove the rear seat back. (Refer
to the Body group - Seat) |
4. |
Disconnect the rear wheel speed
sensor connector. |
5. |
Installation is the reverse of
removal.
Install the rear sensor after lubricating the O-ring of sensor with
the assembly fluid(RAREMAX AF-1) When inserting the sensor, take
care the O-ring not to be damaged.
|
|
1.
Measure the output voltage between
the terminal of the wheel speed sensor and the body ground.
...
See also:
Seat height
To change the height of the seat, move the lever upwards or downwards.
To lower the seat cushion, push down the lever several times.
To raise the seat cushion, pull up the lever several times. ...
Clothes hanger
To use the hanger, pull down the upper portion of hanger.
CAUTION
Do not hang heavy clothes, since those may damage the hook. ...
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the oil temperature
sensor connector.
3.
Measure resistance between sensor
signal terminal and sensor g ...