Kia Optima: Removal
| 1. |
Remove the rear wheel & tire.
Tightening torque:88.3
~107.9 N.m(9.0 ~11.0 kgf.m, 65.1 ~79.6 lb-ft)
|
|
| 2. |
Remove the rear upper arm (A).
|
| 3. |
Loosen the hose eyebolt (C) and
caliper mounting bolts (B), then remove the rear caliper assembly (A).
Tightening torque:Brake
hose to caliper (C):
24.5 ~ 29.4 N.m (2.5 ~ 3.0 kgf.m, 18.1 ~ 21.7 lb-ft)Caliper assembly
to carrier (B):
63.7 ~ 73.5 N.m (6.5 ~ 7.5 kgf.m, 47.0 ~ 54.2 lb-ft)
|
|
Do not loosen the bolts (E) instead of guide rod bolt. |
|
| 4. |
Remove the rear brake disc by
loosening the screws (A).
|
[With EPB]
| 1. |
Remove the rear wheel & tire.
Tightening torque:88.3
~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
|
|
| 2. |
Release the parking brake. |
| 3. |
Disconnect the EPB actuator connector
(A).
|
| 4. |
Disconnect the brake hose from
the brake caliper by loosening the bolt (B). |
| 5. |
Remove the rear upper arm (A).
|
| 6. |
Loosen the caliper mounting bolts
(A) and then remove the rear caliper assembly (B).
Tightening torque:49.0
~ 58.8 N.m (5.0 ~ 6.0 kgf.m, 36.2 ~ 43.4 lb-ft)
|
|
| 7. |
Remove the rear brake disc by
loosening the screws (A).
|
Rear brake pads
1.
Loosen the guide rod bolt (B)
and pivot the caliper (A) up out of the way.
Tightening torque:21.6
~ 31.4 N.m (2.2 ~ 3.2 kgf.m, 15.9 ~ 23.1 lb-ft)
...
See also:
Parking on Curbed Streets
When parking your vehicle on an uphill grade, park as close to the curb
as possible and turn the front wheels away from the curb so that the front wheels
will contact the curb if the vehicle ...
Hazard warning flasher
Type A
Type B
The hazard warning flasher should be used whenever you find it necessary to stop
the car in a hazardous location. When you must make such an emergency stop, always
pull off the ...
Airbag-advanced supplemental restraint system
* The actual air bags in the vehicle may differ from the illustration.
(1) Driver’s front air bag (2) Passenger’s front air bag (3) Side impact
air bag (4) Curtain air bag
WARNING
Even in vehi ...
Replacement (Without EPB)