Kia Optima: Removal
1. |
Remove the front wheel & tire.
Tightening torque:88.3
~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
|
|
2. |
Loosen the hose eyebolt (C) and
caliper mounting bolts (B), then remove the front caliper assembly (A).
Tightening torque:Brake
hose to caliper (C):
24.5 ~ 29.4 N.m (2.5 ~ 3.0 kgf.m, 18.1 ~ 21.7 lb-ft)Caliper assembly
to knuckle (B):
78.5 ~ 98.1 N.m (8.0 ~ 10.0 kgf.m, 57.9 ~ 72.3 lb-ft)
|
Do not loosen the bolts(E) instead of guide rod bolt. |
|
3. |
Remove the front brake disc by
loosening the screws (A).
|
Front brake pads
1.
Loosen the guide rod bolt (B)
and pivot the caliper (A) up out of the way.
Tightening torque:21.6
~ 31.4 N.m (2.2 ~ 3.2 kgf.m, 15.9 ~ 23.1 lb-ft)
...
See also:
Installation
1.
Installation is the reverse of
removal.
•
When installing, apply
the ATF oil or white vasel ...
Adjustment
1.
Check that the waste gate turbo charger is cool enough
to work.
2.
Turn the ignition switch to OFF position.
3.
Connect the diagnosti ...
Inside rearview mirror
Adjust the rearview mirror so that the center view through the rear window is
seen. Make this adjustment before you start driving.
WARNING - Rear visibility
Do not place objects in the rear seat ...