Kia Optima: Removal - Brake Pedal. Repair procedures - Brake System - Brake System - Kia Optima TF 2011-2024 Service ManualKia Optima: Removal

1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
2. Remove the crash pad lower panel and reinforcing panel. (Refer to the Body group- crash pad).
3. Remove the shower duct (A).

4. Pull down steering column shaft after removing bolts and nuts. (Refer to the steering group - Steering columm & shaft)
5. Disconnect the stop lamp switch connector (A).

6. Remove the brake pedal member mounting nut (B).

Tightening torque:

9.8 ~ 14.7 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft)


7. Remove the snap pin (A) and clevis pin (B).

8. Remove the brake pedal member assembly mounting nuts (A) and then remove the brake pedal assembly.

Tightening torque:

12.7 ~ 15.6 N.m (1.3 ~ 1.6 kgf.m, 9.4 ~ 11.6 lb-ft)


Push the brake booster and then remove the hook after raising the brake pedal when removing the brake pedal assembly.

Brake Pedal. Repair procedures
...

Inspection
1. Check the bushing for wear. 2. Check the brake pedal for bending or twisting. 3. Check the brake pedal return spring for damage. 4. ...

See also:

SRS Care
The SRS is virtually maintenance-free and so there are no parts you can safely service by yourself. If the SRS air bag warning light does not illuminate, or continuously remains on, have your vehi ...

Components and Components Location
Component Location(1) 1. Head lamp (Low) 2. Head lamp (High) / Head lamp (High) & DRL in Canada 3. Turn signal & position lamp 4. Side marker 5. Front fog lamp ...

Windshield Wipers
The ignition switch must be ON. To turn the wipers on, move the lever down. INT – Intermittent wiper operation LO – Normal wiper speed HI – Fast wiper speed ...

Copyright © www.kiopman.com 2024